dynamic mechanical analysis

DMA 523 Eplexor High-Force Series

For Large and High-Modulus Samples

The instruments in our high-force Eplexor series offer static and additional dynamic force levels from max. ± 2000 N to max. ± 4000 N, and are thus the perfect choice for investigating the dynamic-mechanical (or only static) properties of rigid samples as well as of specimens with larger dimensions – even component parts.

Thanks to their modular design, high-force DMA instruments can accommodate add-ons to additionally carry out tests on such properties as fatigue, heat build-up, blow-out and rolling resistance.

All testing machines in this series are based on standards such as DIN 53513, DIN 53533, ISO 6721/1, ISO 6721/4, ISO 6721/5, ISO 6721/6, ISO 4664, ISO 4666/3, ISO 4666/4, ASTM D623, ASTM D4065, and ASTM D4473.

The following high-force DMA instruments are available:

Instrument TypeMax. Static ForceMax. Dynamic Force
DMA 523 Eplexor (2000 N)6000 N± 2000 N
DMA 523 Eplexor (4000 N)6000 N± 4000 N

接受营销 Cookie 以观看视频。

Set for the Future
The DMA Eplexor series allows for easy upgrades to the basic instruments with a wide variety of additional options or accessories. Force sensors can be exchanged. 

Unsurpassed Flexibility
With the appropriate hardware and/or software add-ons (which can also be retrofitted), the DMA 523 Eplexor can be converted into, for example, a Goodrich flexometer (ASTM D623), a 24/7 system with automatic sample changer, or an instrument for high-temperature application.  

Non-Stop Operation with the Second-to-None NETZSCH Autosampling Systems
By adding one of the two available autosampling systems (ASC – automatic sample changer or MPAS – multi-purpose automatic sample changer), any DMA Eplexor can be converted to a fully-automatic testing system for up to 160 samples, supporting bending, tension, shear and compression modes. The unrivaled MPAS even facilitates the insertion of sample holders in arbitrary order. 

Designed to Investigate Highly Stiff Materials
Based on a separation between the static and the dynamic drive in combination with blade springs, total force levels of up to 16000 N (static + dynamic) can be applied to the sample, enabling optimal conditions for studying metals, ceramics or composites.  

Maximum Safety during Fatigue and Tensile Tests
As fatigue or tensile tests at the highest force levels are often destructive experiments, the electrodynamic shaker requires effective shock absorption. This is assured by the unique blade spring system featured in NETZSCH instruments.  

Highly Economic LN2 Cooling
Optimized cooling control allows for low liquid nitrogen consumption while working at sub-ambient temperatures.

Technical Data

Temperature range
-160°C to 500°C 
Static force
6000 N 
Frequency range
0.0001 Hz to 100 Hz  

Dynamic force range:
± 2000 N, ± 4000 N (depending on instrument type; see table)

Force sensor:
interchangeable; nominal forces available up to 12000 N*

Blade springs:
for compensating of high static forces and for extending the operation range

Static displacement: 
max. 70 mm

Dynamic displacement:
up to ± 15 mm (DMA 523 Eplexor 2000N / 4000N); each instrument can be equipped with two strain transducers

Additional measuring modes:
creep, relaxation, fatigue, heat build-up, curing, tensile tests

Automatic sample length/thickness determination
... in tension, compression and bending geometry

Automatic sample changer:
max. 160 samples of the same geometry (ASC), also for differing sample holder geometries (MPAS)

 

* The instrument allows for measurements up to 10000 N.

GET IN CONTACT

Scan the QR-Code with your smartphone

 You still have questions and would like to be contacted by our sales department? Would you like to receive a quote for the product? Do you need a poster or brochure for one of our products? Just Scan the QR-Code!